A domestic well normally runs on electricity: the pump brings the water up and keeps your pipes under pressure, which Health Canada calls a physical barrier against contaminants. An outage can stop treatment too. The system may hold several litres during an outage, but using them drops that pressure and raises the chance of contamination, so Health Canada advises keeping the taps closed: no showers, no toilet flushing.
When the power comes back, water at the tap doesn’t mean the water is safe or that treatment is working. Health Canada’s steps: run the water a few minutes to clear stagnant water from the lines; if you have a water treatment system, make sure it is running properly (its manufacturer can advise on other cleaning); and have the well water tested before you use it if your system lost all its pressure or no water came out of the taps.
Don’t wait for a boil water notice. HealthLink BC says owners of private wells serving one home are solely responsible for their water quality, and Interior Health, for one, posts advisories for regulated water systems, not private drinking water.
The Note: My advice is to get familiar with your water system while everything is working. Know where the pressure gauge is, what your water treatment equipment normally displays, and who to call for help. Remember to check your breakers first. Keep a few photos of the equipment and model numbers on your phone.
If the water system doesn't repressurize and return to normal after an outage, tell your pump guy or well service company whether the taps ran dry, what the gauge reads, and whether any warning lights or alarms are showing. Those details give them a useful starting point. And when the water does return, take a moment to check the treatment equipment too.
Who should pay attention: Households and farms on a private well, especially those with a treatment system. A well that supplies two or more connections, such as two homes, makes its owner a water supplier, with responsibilities under BC’s Drinking Water Protection Act.
What to do next: Before the next outage, store clean water (the Province suggests four litres per person per day for at least three days), and keep your treatment system’s manual handy. When the power returns, if the system lost all its pressure, no water came out, or the water looks, smells, or tastes different, use stored or bottled water until an accredited lab’s results show your well water is safe, and call 8-1-1 or your health authority with questions. If water doesn’t come back with the power, call a registered well pump installer. Run a generator outdoors, away from windows and doors, and leave any pump wiring to someone with the right electrical ticket.
Checked against: Health Canada: Well Safety During and After Emergencies, Health Canada: Test Your Well Water, Interior Health: Power Loss, Interior Health: Getting Ready for a Power Outage Toolkit, Interior Health: Drinking Water, HealthLink BC: Well Water Testing, HealthLink BC: Drinking Water, Province of BC: Get Prepared for a Power Outage, and Province of BC: Installing a Well Pump · checked October 24, 2026
Related on the Wire: BC Drought Level, Watering Stage, or Boil Water Notice: What Each One Means; What Should I Check About the Water Supply Before Buying a Rural Property in BC?